EXPERIMENT No-8
OBJECT: Simulation of RIP Configuration
REQUIRED SOFTWARE: Cisco Packet Tracer 8.1.1
Network Diagram
Setup this network:
Router 1.
Step-1
Router>enable Router#config t Router(config)#hostname R1 R1(config)#int fa 1/0 R1(config-if)#ip address 192.168.8.1 255.255.255.0 R1config-if)#no shut R1(config-if)#int fa 0/0 R1(config-if)#ip address 172.16.10.1 255.255.0.0 R1(config-if)#no shut R1config-if)#int se 2/0 R1(config-if)#ip address 20.0.0.1 255.0.0.0 R1(config-if)#no shut R1(config-if)#exit R2#
Step-2
R1(config)#router rip R1(config-router)#network 192.168.8.0 R1(config-router)#network 172.16.0.0 R1(config-router)#network 20.0.0.0 R1(config-router)#exit R1(config)#exit R1#
Router 2.
Step-1
Router>enable Router#config t Router(config)#hostname R2 R2(config)#int fa 0/0 R2(config-if)#ip address 192.168.20.1 255.255.255.0 R2(config-if)#no shut R2(config-if)#int se 2/0 R2(config-if)#ip address 20.0.0.2 255.0.0.0 R2(config-if)#clock rate 64000 R2(config-if)#no shut R2(config-if)#exit
Step-2
R2(config)#router rip R2(config-router)#network 192.168.20.0 R2(config-router)#network 20.0.0.0 R2(config-router)#exit R2(config)#exit R2#
Note:-
RIP Command
show ip route With this command, you can see the routing table. You can see the router information of that router by writing the IP address next to this command.
debug ip rip With this command you can configure RIP in real time.
show ip protocol With this command the user can view RIP Protocol Information.
show ip rip database It is used to view the RIP database.
Download Cisco Packet Tracer 6.22
Download Cisco Packet Tracer 8.1.1
1. Which of the following TCP/IP protocol is used for transferring electronic mail messages from one machine to another?
SNMP
2.Which of the following device is used to connect two systems, especially if the systems use different protocols?
gateway
3. The synchronous modems are more costly than the asynchronous modems because
they contain clock recovery circuits
4. A distributed network configuration in which all data/information pass through a central computer is
star network
5. Which of the following TCP/IP protocol allows an application program on one machine to send a datagram to an application program on another machine?
UDP
6. A remote batch-processing operation in which data is solely input to a central computer would require a:
simplex lines
7.ICMP (Internet Control Message Protocol) is
a protocol that handles error and control messages
8. If you get both local and remote echoes, every character you type will appear on the screen
twice
9.What part of 192.168.10.51 is the Network ID, assuming a default subnet mask?
192.168.10
10. A computer network permits sharing of
Both C & D
11. The first operational computer network in the world was the _________ for the United States Department of Defense
ARPANET
12. ATM stands for
Automated teller machine
13. _______ is the technology that connects the machines and people within a site in a small area
LAN
14. ______ is a network that covers geographic areas that are larger, such as districts or cities
MAN
15. ______ is a network that this technology connects sites that are in diverse locations
WAN
16. ______ is a collection of point-to-point links that may form a circle
Ring topology
17. ATM networks are
connection oriented
18. DHCP stands for
Dynamic Host Configuration Protocol
19. Which protocol layer uses the protocols are WWW, HTTP, FTP, SMTP, e-mail etc
Application Layer Protocol
20. The internetworking protocol is known as
TCP/IP
21. If single computer network is divided into segments and router are added between them it forms an
Internetwork
22. Check sum is used for
Error detection
23. The type of packet format supported by X.25 are as follows
Both a & b
24. ISDN stands for
Integrated Service Digital Network
25. If routing information is automatically updated by routers when changes are made to the network configuration are called
Dynamic routing
26. ARP stands for
Address Resolution Protocol
27. If two or more routers are connected to the same subnet, the network administration determines which of the routers the messages should be sent to eliminate this problem._____ are used
IMCP messages
28. If two or more routers are available in distributed routing, which route should be selected
Link cost
29.How many frames are included for traffic in 26TDMA frames
24
30. What is the port number of the HTTP
80
